PCIE 4X SATA Card 10 Ports, 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-Raid, with Low Profile Bracket and 10 SATA Cables Q713

PCIE 4X SATA Card 10 Ports, 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-Raid, with Low Profile Bracket and 10 SATA Cables Q713

Sale price  $29.90 Regular price $93.08
Skip to product information
PCIE 4X SATA Card 10 Ports, 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-Raid, with Low Profile Bracket and 10 SATA Cables Q713

PCIE 4X SATA Card 10 Ports, 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-Raid, with Low Profile Bracket and 10 SATA Cables Q713

Sale price  $29.90 Regular price $93.08
Shipping calculated at checkout.

10 Ports PCI-E to SATA 3.0:This PCIE SATA CARD allows you to add 10 SATA 3.0 6Gbps devices to your computer. No need to drive, plug and play.
PCI-Express X4 interface, Chip signal is 2X,compatible with PCI-Express X4 /X8 /X16 slots.(Recommended under PCI-E 3.0, faster use)
Powerful chip: ASMedia ASM1166 Chip, with heat sink, long-lasting high temperature resistance, high-speed and stable transmission.
System support: Compatible with Windows/8/10/Ubuntu/Linux.Support SATA interface hard disk/optical drive/SSD solid state drive.
Compatible with SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps)。Comply with PCI-Express 3.0 specification and backward compatible with PCI-Express 2.0.

Product name: 10-port SATA3.0 expansion card
Product interface: PCI-E4X (chip signal is 2X)
Product chip: ASM1166
Support system: Windows 8 / Windows10 / Ubuntu /Linux.
(Synology can only recognize 4 hard drives; WIN7 users are not recommended to buy)

Specification:
●Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0
●Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0.
●Support 6.0Gb/s, 3.0 Gbit/s and 1.5 Gbit/s
●Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.
●Support Native Command Queuing (NCQ)
●Support FIS based on port multiplier switch or command switch.
●Support hot swap.
●Compatible with SATA6G, 3G and 1.5G hard drives
●Motherboard applicable slot PCI-Ex4 and above Note: PCI, PCI-E x1 cannot be used

Note: RAID is not supported. The RAID in INTEL only applies to raw SATA. It is an expansion card that cannot support third-party chips.

Speed description information:
1. Use SATA3.0 data cable to achieve the best results.
(We recommend using this SATA 3.0 card in the PCIE3.0 slot to get the fastest speed.)
2. PCI-E requires a slot above V2.0. For V1.0, the speed will not exceed 250M.
3. Motherboard BOIS setting: SATA mode should be changed to AHCI.
Although some motherboards are PCIE 2.0 version, BOIS does not enable gen2 high-speed mode by default and needs to be turned on manually.
The fastest speed of PCI-E 2.0 is 380-450 m/s.
Different computer configurations and SATA SSDs have different speeds.

⭐If the detection is incomplete or unstable, please contact us to send the driver.

Packing List:
PCIe 4X to 10 Ports SATA 3.0 card *1
Half-height bracket baffle *1
SATA cable *10

You may also like